Skip to content

Static vs dynamic QR codes

A static QR code holds your link in its pattern: it needs no provider and keeps working as long as the link does, but it can't be changed after printing. A dynamic QR code holds a short link that a provider forwards to your page: you can edit and track it, but it works only while the provider keeps forwarding.

Last updated 4 min read

A guest at a restaurant table points a phone camera at a printed QR code card, with small plates of food blurred behind it

What is a static QR code?

A static QR code is one whose pattern spells out the final address: a phone decodes it and opens that address straight away, with no server in between. Nobody can change where it goes after printing, and nothing about it depends on a provider staying in business.

A static code doesn't belong to the generator that made it: the pattern follows the public QR code standard (ISO/IEC 18004), and any phone camera reads it without the generator's help. The one thing that can break it is the address itself: a deleted page, a lapsed domain or a file moved to a new name.

What is a dynamic QR code?

A dynamic QR code holds a short link on a QR provider's domain instead of your address: each scan reaches the provider's server first, which records it and forwards the phone to the destination set in your account. Change that destination, and the printed code goes somewhere new.

That middle step is what makes editing and scan counts possible, and it is also the weak point: the code works only while the provider runs the forwarding for you. Plans differ: many providers stop forwarding when a trial or subscription ends, and some cap the scans on free plans.

Static and dynamic QR codes side by side

The whole difference is one extra stop: a dynamic code sends every scan through the provider before it reaches your page. That stop buys editing and scan counts, and costs independence, a little speed and, usually, a fee.

Static QR codeDynamic QR code
What the pattern holdsYour full addressA short link on the provider's domain
Change the destination after printingNo: make a new codeYes, in the provider's account
Scan countsNone from the code itself; your site's own statistics still see the visitsYes, from the provider's server
If you stop paying, or the provider closesKeeps workingStops when the forwarding stops
Scan limitsNone: nothing counts the scansPossible on free plans
Extra redirectNo: the phone opens your page directlyYes: every scan passes through the provider
Pattern densityGrows with the length of your addressA short link, so fewer, larger squares
CostFree to makeUsually a paid plan

Which should you use?

Use a static code when the link is stable, which covers most printed codes. Use a dynamic code only when you must re-point codes that are already printed, or need scan counts, and accept the plan that comes with it.

  • Static for a website, a social profile, a review form, a booking page or a document with a fixed public address. There is nothing to renew.

  • Dynamic for campaigns whose destination changes often, or where counting scans per code matters more than independence.

  • The third way a static code that opens a page you control and can edit: your own website, a link page or a QR code menu. You change the page, not the code, and depend on no QR plan.

How can you tell which one you have?

Point your camera at the code and look at the address the phone previews: a QR company's short domain means dynamic, the destination's own domain means static. The step-by-step check is in our expiry guide.

Can a dynamic code become static?

Not the printed one: its pattern holds the provider's short link. You can replace it, though: let the dynamic code forward you once, copy the final address, and make a static code of that address.

  1. Scan the old code

    Let it open the page, then copy the address from the browser's address bar.

  2. Tidy the address

    Remove tracking parameters the provider added, such as utm_source, unless you want them.

  3. Make a static code

    Paste the address into our free QR code generator and download a PNG or SVG.

  4. Replace every print

    Put the new code up before the old plan ends, and test each print.

Frequently asked questions

Do static QR codes expire?

No. A static code has no expiry date of its own; it works for as long as the address inside it does.

Can I edit a static QR code?

Not the link inside it: that is part of the pattern. Make a new code, or point the code at a page you can edit and change the page.

Are dynamic QR codes free?

Sometimes, within limits: some providers offer a few free dynamic codes, often with time or scan caps. Most charge for a plan, so read its terms before you print.

Do dynamic QR codes collect data?

They can. Every scan passes through the provider's redirect, which can log it; that is how scans are counted. A static code opens your link directly, with nobody in between.

Can I make a static QR code for free?

Yes. Our free QR code generator makes static codes from any link, as PNG or SVG, with no card and no trial.

Something else? Email hello@tablemenu.link.

Have a restaurant?

Make a menu with its own QR code.